Basic Operations; Adjusting The Tone; Adjusting The Balance; Adjusting The Fader - Clarion ProAudio DXZ525 Owner's Manual

Adjusting the tone

Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes in the following order:
When "B BOOST" is set
"B BOOST" "BAL 0"
OFF" Last function mode.
When "IMPACT" is set
"IMPACT" "BAL 0"
OFF" Last function mode.
When "EXCITE" is set
"EXCITE" "BAL 0"
OFF" Last function mode.
When "CUSTOM" is set
"BASS" "TREB"
"LOUD OFF" Last function mode.
When "Z+ OFF" is set
"BAL 0" "FAD 0"
function mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "BASS".
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
The factory default setting is "B<G 0>". (Ad-
justment range: –6 to +6)
3. Press the [d] or [a] button to select "B<F
60>".
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
The factory default setting is "B<F 60>".(Ad-
justment 60/100/200 Hz)
4. Press the [d] or [a] button to select "B<Q 1>".
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
The factory default setting is "B<Q 1>".(Ad-
justment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
"FAD 0" "LOUD
"FAD 0" "LOUD
"FAD 0" "LOUD
"BAL 0" "FAD 0"
"LOUD OFF" Last
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "TREB".
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
The factory default setting is "T<G 0>". (Ad-
justment range: –6 to +6)
3. Press the [d] or [a] button to select "T<F
10>".
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
The factory default setting is "T<F 10>".(Ad-
justment 10 kHz/15 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.

Adjusting the balance

1. Press the [A-M] button and select "BAL".
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
The factory default setting is "BAL 0". (Adjust-
ment range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.

Adjusting the fader

1. Press the [A-M] button and select "FAD".
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
The factory default setting is "FAD 0". (Adjust-
ment range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.

Basic Operations

13
DXZ525