Table of Contents
Advertisement
7. OPERATIONs
DCP Operations
The control panel can be detached to prevent theft. When detaching the control panel, store it in the
DCP (Detachable Control Panel) case to prevent scratches. Please take the DCP with you when
leaving the car.
Remove DCP
① When the control panel is open
Keep pressing the [RELEASE] button on the back of the DCP and pull the front side of the
DCP toward you, and remove it.
Attach DCP
① Hook the left side of the DCP.
② Press the right sides of the DCP with force.
Cautions
■ The DCP can easily be damaged by impact. After removing it, be careful not to drop or give
impact.
■ Remote control unit cannot be used when the DCP is removed.
■ If the DCP is dirty, wipe it off by using a soft dry cloth.
Basic Operations
POWER ON/OFF
■ Start the engine before using this unit. The illuminations on this unit will light up.
■ Press and hold the [SRC] button for more than 2 seconds to turn the power on. To open the
Control panel, press the [TILT] button more than a second. The last mode screen is displayed.
■ Press and hold the [SRC] button for more than 2 seconds to turn the power off.
When the unit is turned on, starting and stopping the engine with the volume raised to
※
maximum level may harm your hearing. Be careful when adjusting the volume. Be careful
whenusing this unit for prolonged periods of time without running the engine. If the car battery
is discharged to excessive levels, you may not be able to start the engine and can reduce the
service life of the battery.
PUsh
Advertisement
Table of Contents
