Chengdu Ebyte Electronic Technology Co.,Ltd.
E90-DTU(433C30E)-V2.0 User Manual
2.7. UDP server usage
Configure the Ethernet parameters of the "Gateway Radio", the host computer and web page are configured as
follows:
After the configuration is completed, the LINK indicator of the device is always on, and the NetAssist is connected
to the "gateway radio" as shown in the figure below:
Data sending and receiving test (in UDP server mode, data must be sent by PC first, then UDP can dynamically
adjust the destination address, and the data sent by serial port can only be received by the UDP of the last
communication):
13
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd.