Safety; General Safety; Handling Safety - AEG AS-BBH1-10000/HV Series Installation Manual

High voltage battery
Table of Contents

Advertisement

2. SAFETY

2.1 General safety

All AEG high voltage batteries are tested according to
international safety regulations.
AEG high voltage batteries should be installed,
maintained, connected and operated by qualified
technicians in compliance with all local and national
applicable standards, codes and regulations issued
by the relevant power suppliers, companies and
authorities. Installers bear the risk of all injury that
might occur during installation including, without
limitation, the risk of electric shock. Check and follow
all safety precautions specified even for the other
components of the system. Keep children away
from the installation site and during transportation,
installation and maintenance of the electrical
equipment.

2.2 Handling safety

Please observe the following indications when handling
the AEG high voltage battery.
Look for any visible damage to the package or the
product itself. Double-check the order information and
the product nameplate to ensure the products are of
the ordered type. Check that the package contents are
not damaged and that all items listed are present (see
4.5 „Unboxing and package content"). Should you find
any issues, contact the shipping company and / or your
supplier as soon as possible before attempting product
installation.
Take note of the indications displayed on the product
packaging. Specifically:
Icon
Meaning
This side up
Fragile
Handle with care
Do not turn or drop
Do not stack
AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL
Icon
Meaning
Keep dry
Packaging icon meaning
Please make sure that the high voltage battery and
its components are properly packed and sealed to
ensure safe transportation. Ensure that the battery
pack is stored in a dry, clean place and not exposed to
water or dust.
The battery pack is heavy. Handle it carefully in
order to avoid injuries. At least two people are
Kg
required to move and install the battery pack.
To ensure handling, installation and maintenance
safety, and to avoid personal injuries, please adopt
mechanical protective measures such as wearing
protective shoes and work clothes.
To avoid electric shock, remove metallic
rings, watchbands, ear, nose or lip rings or other
metallic devices during installation, connection and
maintenance of the high voltage battery.
2.2.1 Handling the battery pack
Handle the battery pack carefully as it may leak
+ _
corrosive electrolyte.
To avoid the risk of explosion of the battery pack,
make sure to observe the following:
Do not make the battery pack undergo strong impacts.
Do not crush or puncture the battery pack.
Do not dispose of the battery pack in a fire.
To avoid fire risks to the battery pack, please make
sure to observe the following:
Do not expose the battery pack to temperatures that
exceed 60°C.
Do not place the battery pack near a heat source, such
as a fireplace.
Do not expose the battery pack to direct sunlight.
Do not allow the battery connectors to touch
conductive objects such as wires.
To avoid the risk of the electric shock from the
battery pack, please make sure to observe the following
handling instructions:
Do not disassemble the battery pack.
4
EN
PD202209 V2-1-22

Advertisement

Table of Contents
loading

This manual is also suitable for:

As-bbh1-15000/hv series

Table of Contents