AEG AS-BBH1-10000/HV Series Installation Manual page 11

High voltage battery
Table of Contents

Advertisement

AS-BBH1-10000/HV
Item
Distance (mm)
1
572
2
116
3
298
4
116
5
60
AS-BBH1-15000/HV
Item
Distance (mm)
1
796
2
116
3
298
4
116
5
60
Step 3-WiFi installation (if applicable): Insert the WiFi
module according to the system configuration: single
battery unit or battery units connected in parallel, for
details see below:
Single battery unit:
The Wi-Fi module should be connected to the CAN2
port of battery with Wi-Fi cable. Please see the below
figure for details.
Item
Remark
1
WiFi installation position
Battery units connected in parallel:
You only need to install 1 Wi-Fi module on the Control
Box AEG AS-BAC1-4W/HV. Please see the below figure
for details.
AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL
Item
Remark
1
WiFi installation position
Remarks: You can find the user manual of the WiFi
module in the WiFi pakcing box. In pure off-grid case
when the first installation is completed, if there is no PV
power, long press the battery main switch to start the
system.
Step 4 - Connecting the inverter: Connect the inverter
and battery module with the communication and
battery cable. Turn on the breaker placed on the right
side of the AEG high voltage battery. Please refer to the
below figure for details.
Item.
Description
1
Details
2
CAN1
3
Black start
4
Breaker
CAN1 is connected to inverter for communication.
The AEG high voltage battery can only operate after
11
EN
PD202209 V2-1-22

Advertisement

Table of Contents
loading

This manual is also suitable for:

As-bbh1-15000/hv series

Table of Contents