Product End Of Life; Disclaimer Of Liability - AEG AS-BBH1-10000/HV Series Installation Manual

receiving the inverter's communication instructions.
After the system is powered on, you need to select the
battery communication protocol on the inverter, so that
the system can run normally.
Step 5 - Electrical connection of the battery pack
For connection of a single battery pack:
Item. Description
1 Battery pack
2 Breaker
3 Inverter
For connection of multiple battery packs in parallel:
Item. Description
1,2,3,4 Battery pack
5 HV Pack Parallel Box
6 Breaker
7 Inverter
AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL
Step 6- DOD setting of the inverter To make sure the
battery working smoothly, we recommend the DOD
setting of inverter as follows.
On-grid DOD: 80%
Off-grid DOD: 70%

5. PRODUCT END OF LIFE

Please return any electrical equipment that you no
longer use to the collection points provided for their
disposal. Information concerning where the equipment
can be disposed of can be obtained from your local
authorities.
The battery pack is suitable for recycling
through a professional battery recycling
company
The wheelie bin symbol on the AEG product
labels means that the equipment shall be
disposed of as special waste in accordance to
the local regulations.

6. DISCLAIMER OF LIABILITY

The use of this manual and the conditions or methods
of installation, operation, use and maintenance of this
product are beyond Solar Solutions's control. Solar
Solutions expressly disclaims liability for loss, damage,
or expenses arising out of or in any way connected with
such installation, operation, use or maintenance.
Solar Solutions will not be responsible for
consequences caused by any of the following events:
• Damage caused by transportation.
• Storage conditions do not meet the requirements
specified in the manual, resulting in product
damage.
• Incorrect storage, installation, and use of the
product.
• Product installation and operation performed by
unqualified personnel.
• Failure to comply with the operation instructions
and safety precautions set forth in this manual.
• Product installation or operation in extreme
environments that are not covered in this manual.
• Product installation or operation in environments
not specified in the related international standards
12
EN PD202209 V2-1-22