Summary of Contents for AEG AS-BBH1-10000/HV Series
Page 1
AEG HIGH VOLTAGE BATTERY INSTALLATION MANUAL AEG HIGH VOLTAGE BATTERY SERIES: AS-BBH1-10000/HV AS-BBH1-15000/HV AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL VERSION: PD202209 V2-1-22...
Keep this guide in a safe place for further reference as it contains important information for product care, maintenance and disposal. AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...
It provides information about the main parameters of the device such as: Product Name Code (PNC), Battery Type, Capacity, Nominal Voltage and Nominal Energy, Charge, and further operation parameters. AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...
To avoid the risk of the electric shock from the Do not turn or drop battery pack, please make sure to observe the following handling instructions: Do not stack Do not disassemble the battery pack. AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...
AEG service personnel. Ensure that unauthorized people do not access the Use only installation equipment suitable for a solar maintenance area during maintenance operations. electric installation. AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...
Ingestion: induce vomiting, and seek immediately temperature protection. The battery pack further medical attention supports CAN communication and features a WiFi connection module The number of battery units can be AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...
Battery + / positive battery pole Battery - / negative battery pole 3.2.3 CAN communication interface (CAN1 & CAN2) Below is the scheme of the CAN communication interface. AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...
4.1 Installation tools and materials discharge 0.2°C Please ensure you have the following items at hand DC disconnect Contactor before beginning the installation of the AEG high Fuse voltage battery: AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...
Before installing the product, please carry out a first check of the package and the package content as Wire strippers described in 2.2 „Handling safety“. Below is a sketch of the packing box of the AEG high Safety (insulated) gloves voltage battery. Safety goggles...
Ensure there are no corrosive gases at the installation site, including ammonia and acid vapor. • Ensure there are no flammable or explosive materials at the installation site or nearby. AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...
Page 11
Turn on the breaker placed on the right side of the AEG high voltage battery. Please refer to the Single battery unit: below figure for details. The Wi-Fi module should be connected to the CAN2 port of battery with Wi-Fi cable.
Product installation or operation in extreme Inverter environments that are not covered in this manual. • Product installation or operation in environments not specified in the related international standards AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...
7. CONTACT Solar Solutions BV Finlandlaan 1 2391PV Hazerswoude-Dorp, The Netherlands www.aeg-industrialsolar.de Mail: service@aeg-industrialsolar.de AEG is a registered trademark used under license from AB Electrolux (publ). AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...
Page 14
Solar Solutions Products BV Finlandlaan 1 2391PV Hazerswoude-Dorp The Netherlands service@aeg-industrialsolar.de | www.aeg-industrialsolar.de AEG is a registered trademark used under license from AB Electrolux (publ). AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL PD202209 V2-1-22...