Wire Specifications; Unboxing - AEG AS-BBH1-10000/HV Series Installation Manual

High voltage battery
Table of Contents

Advertisement

Item
Description
Tape measure
Phillips-screwdriver
Crimping tool
Wire cutters
Wire strippers
Safety (insulated) gloves
Safety goggles
Dust mask
Safety shoes
Use properly insulated tools to prevent accidental
electric shock or short circuits.
The below installation material should be arranged by
the installer for the installation of the battery pack:
Charging cables
Network cable
DC breaker

4.2 Wire specifications

In order to standardize the wiring specifications of
the AEG high voltage battery AS-BBH1-xxx/HV (xxx=
10000 and 15000) please make sure to follow the
below requirements for the connecting wires:
AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL
Battery cable
Recommended:
8 AWG / 10mm²
conductor with double
insulation

4.3 Unboxing

Due to its weight, the AEG high voltage battery
needs to be handled by two or more people.
Before installing the product, please carry out a first
check of the package and the package content as
described in 2.2 „Handling safety".
Below is a sketch of the packing box of the AEG high
voltage battery.
Step 1: Open the packing box, take out the wall bracket
and remove the EPE plate .
Item.
Description
1
EPE plate
2
Wall bracket
3
AEG high voltage battery
Communication cable
Recommended: standard
communication cable
with shielding function
EN
PD202209 V2-1-22
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

As-bbh1-15000/hv series

Table of Contents