Stihl BG 50 Instruction Manual page 3

2 Safety Precautions and Working Techniques
STIHL recommends the use of original STIHL
parts and accessories. They are specifically
designed to match the product and meet your
performance requirements.
Never attempt to modify your power tool in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
2.2 Physical fitness
To operate the power tool you must be rested, in
good physical condition and mental health. If you
have any condition which may be aggravated by
strenuous work, check with your doctor before
operating a power tool.
If you have a pacemaker: The ignition system of
your machine produces an electromagnetic field
of very low intensity. This field may interfere with
some pacemakers. To reduce health risks,
STIHL recommends that persons with pacemak‐
ers consult their physician and the pacemaker
manufacturer before operating this tool.
Do not operate the power tool if you have con‐
sumed alcohol or taken medication, which may
impair responsiveness, or taken drugs.
2.3 Intended Use
The blower is designed for blow-sweeping
leaves, grass, paper and similar materials, e.g. in
gardens, sports stadiums, car parks and drive‐
ways. It is also suitable for blow-sweeping forest
paths.
The machine must not be used for any other pur‐
poses – risk of accidents!
Do not operate or store your machine at temper‐
atures below ‑10 °C – extreme cold may damage
machine components.
2.4 Personal Protective Equip‐
ment / Personal Protective
Clothing
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow
complete freedom of movement.
Wear close-fitting clothes such as a
boiler suit, not a loose jacket.
Avoid wearing any clothing, scarves, neckties or
jewelry which could get into the air intake. Tie up
and confine long hair above your shoulders.
Wear sturdy shoes with non-slip soles.
0458-425-0121-D
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166. Make sure the safety
glasses are a snug fit.
Wear "personal" sound protection, e.g. ear
defenders.
2.5 Transporting the machine
Always stop the engine.
Transporting in a vehicle:
– Secure the machine against overturning, dam‐
age and fuel spillage
2.6 Refueling
Gasoline is extremely flammable –
keep it away from naked flames – do
not spill any fuel – no smoking.
Always shut off the engine before refueling.
Do not fuel a hot engine – fuel may spill and
cause a fire.
Open the fuel cap carefully to allow any pressure
build-up in the tank to release slowly and avoid
fuel spillage.
Only refuel the machine in a well ventilated
place. If you spill fuel, wipe the machine immedi‐
ately – if fuel gets on your clothing, change
immediately.
Check for fuel leakage! Never start
the engine if fuel has been spilled or
is leaking – Fatal burns may result!
After fueling, tighten down the screw-
type fuel cap as securely as possible.
This helps reduce the risk of unit vibrations caus‐
ing an incorrectly tightened fuel cap to loosen or
come off and spill quantities of fuel.
2.7 Before starting
Check that your power tool is properly assem‐
bled and in good condition – refer to appropriate
chapters in the User Manual:
– Check the fuel system for leaks, especially the
visible parts, e. g., fuel cap, hose connections,
manual fuel pump (only in machines with a
manual fuel pump). In case of leakage and
damage, do not start the engine – risk of fire!
English
3