Table of Contents
Advertisement
Installation
WARNING-HIGH VOLTAGE!!
Improper handling or use of this
product could result in severe electrical
shock. Have a qualified technician only
install this traction control system!!
Failure to properly insulate connection
could result in electrical shock!
Installation of the system is very simple. It is very
important
to
make
all
connections
correctly.
Improper installation could result in poor system
performance or damage to the unit.
The unit should be mounted away from any sources
of electrical noise or high heat.
It can be easily
mounted with Velcro to allow for easy removal.
Also, follow all recommendations made by the
ignition system manufacturer pertaining to the
routing of wires, type of spark plugs, and wires used.
For best performance, suppression type plug wire
are recommended. Solid core wires typically found
on magneto systems may cause improper operation
of the unit, and possibly permanently damage the
unit.
®
MSD
Super Conductor® wires are recommended.
Resistor type racing plugs may also be used if
supression wires are not available.
6
Davis Technologies TMS-5500-SL Elec Points
www.moretraction.com
Advertisement
Table of Contents
