Advanced
following these steps.
1.
Turn the power "On"
2.
Set "M" dial to "0".
3.
Press the "Test" button and HOLD
DOWN.
4.
First, the value of the Starting RPM
shown. The LED will blink for the first digit
followed by a short pause, then the LED will
blink for the second digit.
Blinks)
blinks).
5.
After a pause, The value for the Ending RPM %
is shown. The LED will blink for the first digit
followed by a short pause, then
will blink for the second digit.
RPM = 9,7 Blinks) (zeros are indicated by
shorter blinks).
6.
After a short pause, the LED will flash for the
value of Trigger Count.
7.
After a short pause, the LED will flash for the
value of Minimum Corrections.
8.
After a short pause, the LED will flash for the
value of Type.
24
Davis Technologies TMS-5500-SL Elec Points
values can be verified at any time by
(zeros
are
(1 = Asphalt, 2 = Dirt)
www.moretraction.com
(5000 RPM = 5,0
indicated
(97%
(4 Triggers=4 Blinks).
(Default = 9)
is
by
shorter
the LED
of max