Q u i c k S t a r t G u i d e W i B o x 2 1 0 0 WHAT’S IN THE BOX The WiBox allows serial devices to connect and communicate over 802.11b wireless networks using IP protocol (TCP for connection-oriented stream appli- In addition to the WiBox, your package contains the following items: cations and UDP for datagram applications).
Gateway: ___ ___ ___ ___ 5. Upon connection, the following information displays: WLAN SSID: ________________ note: this is case-sensitive *** Lantronix WiBox Device Server *** WEP Enabled Y/N? _______ MAC address 00204A8178A4 WEP Key 64 bit or Software version 05.6b3 (040519)
Q u i c k S t a r t G u i d e W i B o x 2 1 0 0 CONFIGURE IP ADDRESS CONFIGURE IP ADDRESS CON’T. Two configuration options must be set for the WiBox to communicate on a d) Change Telnet Configuration Password: change the Telnet configuration wireless network: password to prevent unauthorized access to the Setup Menu.
Q u i c k S t a r t G u i d e W i B o x 2 1 0 0 CONFIGURE WLAN SETTINGS CONFIGURE WLAN SETTINGS CON’T. 1. To configure the WLAN settings, select 4 from the Change Setup menu and f ) Change Key: displays when WEP is enabled.
Q u i c k S t a r t G u i d e W i B o x 2 1 0 0 TROUBLESHOOTING TEST CONNECTION WIBOX LED The WiBox is ready for wireless connection. To verify that the WiBox established LEDs MEANING a WLAN connection, open a browser from a PC on the same wireless network...
Page 8
Q u i c k S t a r t G u i d e W i B o x 2 1 0 0 CONTACT For questions and technical support, please check our online knowledge base at www.lantronix.com/support. If you need additional help call us at: (800) 422-7044 Domestic...