Toshiba GR200 Series Instruction Manual page 142

Distance carrier command protection (DISCAR)
When every IED can exchange operational information mutually using communication system,
accurate decision of whether or not a fault is internal on the line can be made. Distance carrier
command protection (DISCAR) can provide such protection using the distance protection
(ZS/ZG). Consequently, the whole length of the line can be protected promptly for any fault.
The following techniques are provided in DISCAR:
1.
2.
3.
4.
The function of autoreclose (ARC) can be operated speedy using these protections above;
and these can issue either a single-pole trip signal or three-poles trip signal in accordance with
DISCAR settings and the states of faults.
─────────────────────────────────────────────────────────────────
Note: The implementation of particular features is dependent upon the selection of
hardware and the configuration of functions. Several IED models do not support certain
features. To determine whether a particular feature has been implemented within an IED,
identify the IED ordering number; and check the order number for the "G&T position" whilst
referring to the comparison table below. For more information, see
Table 2.3-1 Comparative table in respective ordering numbers
✓: Applicable
Permissive underreach protection (PUP)
Permissive overreach protection (POP)
Unblocking overreach protection (UOP)
Blocking overreach protection (BOP)
Sec. Feature
– Main features
NA: Not applicable
Ordering No. at "G&T"
31 32
✓ ✓
- 121 -
6F2S1915 (0.46)
Appendix: Ordering
.
GRZ200 (Soft 031 & 032)