Performance/Safety Features; Maintenance And Care - Kenmore SpotLite KW2001 Use & Care Manual

THERMAL PROTECTOR
This carpet cleaner has a thermal protector
which automatically trips to protect it from
overheating. When the thermal protector
activates, the attached tool will stop
spraying.
To reset thermal protector: Turn the carpet
cleaner off and unplug the power cord
from the outlet to allow the carpet cleaner
to cool and the thermal protectors to reset.
Always follow all safety precautions when performing maintenance to the carpet cleaner.
WARNING
Electrical Shock and Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the carpet cleaner. Failure to
do so could result in electrical shock or personal injury from carpet cleaner suddenly
starting.
CLEANING EXTERIOR AND ATTACHMENTS
1. Turn off and unplug carpet cleaner. DO
NOT drip water on carpet cleaner.
2. To clean exterior, or to reduce static
electricity and dust build-up, wipe outer
surface with a clean, soft cloth that has
been dipped in a solution of mild liquid
detergent and water, then wrung dry.
Wipe dry after cleaning.

PERFORMANCE/SAFETY FEATURES

MAINTENANCE AND CARE

Empty the dirty water tank. Also check
for any obstructions if necessary. Wait
approximately 30 minutes before restarting
carpet cleaner.
If the problem persists, contact the vacuum
cleaner help line for assistance.
NOTE:
Wash attachments in warm
soapy water, rinse and air dry. Do not
clean in dishwasher.
- 13 -