Kenmore SpotLite KW2001 Use & Care Manual page 10

Portable carpet spot and pet stain cleaner
Hide thumbs Also See for SpotLite KW2001:
Table of Contents

Advertisement

Available languages

Available languages

NOTE:
An 8 oz. (236ml) bottle of
cleaning formula is provided with this
carpet cleaner. Ensure the cleaning formula
and water are mixed correctly. Water must
be at room temperature. Once depleted,
the cleaning formula can be replaced by a
high-quality liquid carpet cleaning solution
that can be purchased from a local
retailer.
NOTE:
Using more than the
recommended amount of cleaning formula
may cause excessive foaming. KEEP OUT
OF REACH OF CHILDREN. In case of eye
contact, thoroughly flush with cold water.
If irritation persists, consult a physician.
NOTE:
Before using the carpet cleaner,
use a vacuum to remove loose dirt from
area to be cleaned. Test a small hidden
area for colorfastness. Gently rub surface
with a dampened white cloth. Wait 10
minutes and check for color removal with
a white paper towel. If color changes, do
not use.
NOTE:
To prevent staining, use plastic
or aluminum foil to protect wood or metal
surfaces from possible water spray.
To protect the wood floors underneath rugs
or carpet, place waterproof material (e.g.
plastic) underneath them before cleaning.
1. Unwrap the hose from the unit. Select
the preferred tool and make sure it is
attached securely.
3.5'' Tough Stain Tool: Use for carpet stains,
furniture and other hard-to-reach surfaces.
6.5'' Wide Path Tool: Use for cleaning
stairs and larger furniture areas.
FILLING THE CLEAN WATER TANK
USING THE CARPET SPOT CLEANER
3. Snap the clean water tank cap back into
place.
4. Slide the clean water tank back into the
unit, pressing down firmly until it feels
secure.
2. Turn the cord hooks inward from either
side to release the power cord.
WARNING
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.
- 10 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents