Setting Range; Terminal Connections - M-system R80DAT16A2 Instruction Manual

PC CONFIGURATOR
The following parameters can be set using PC Configurator Software (model: R80CFG)
Refer to the users manual for the R80CFG for detailed operation of the software program.
ITEM
Sampling cycle
Note) Settings are programmed by the PC Configurator via the Power/Network Module.

TERMINAL CONNECTIONS

Connect the unit as in the diagram below.
■ EXTERNAL DIMENSIONS unit: mm [inch]
.

SETTING RANGE

100 μs, 200 μs, 400 μs, 800 μs, 4 ms,
8 ms, 16 ms, 40 ms
24 [.94] (3 [.12])
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
DEFAULT VALUE
100 μs
72 [2.83] (4 [.16])
55 [2.17]
DIN rail
(35 mm wide)
R80DAT16A2
EM-7031 P. 4 / 5