Ricoh M018 Service Training page 12

Main Specifications - 2/2
Memory (RAM)
128 MB (Main board: PE-MF2b & PE-MF2c)
PE-MF2c also has 128MB on its PDL board
(built-in), with an empty slot which can be
upgraded with an optional 256MB board, for a
maximum of 384MB on the PDL board (in
addition to the main board's 128MB)
» Note: As the memory for the main board and the
memory for the PDL board serve different functions, the
128MB of the Main Board and the maximum of 384MB
on the PDL board should not be thought of as additive
for a total of 512MB.
Slide 12
Memory
PE-MF2b (GDI model): The memory on the main board is used for
printing.
PE-MF2c (PDL/PS model): The memory on the PDL board is used for
printing. Raster data in the memory on the PDL board is sent to the
memory on the main board. However, the memory on the main board is
not used for printing processing; it is only a temporary holding area. So
the 128 MB on the main board cannot be included in the total printer
memory spec.
Print Resolution settings: There are three settings (600 x 600 1-bit, 600 x 600
2-bit [also called 1200 x 600], 600 x 600 4-bit [also called 2400 x 600 dpi])
Without 256 MB of extra memory, 2400 x 600 dpi duplex LG size cannot
be printed (PCL/PS). For PostScript printing, 2400 x 600 dpi Duplex
also cannot be printed for A4/LT or A5.
Other specs
Maximum paper size for scanning
Exposure glass: A4, Letter (8.5×11")
ADF: Legal (8.5×14")
Maximum paper size for printing: Legal (8.5×14")
ADF capacity: 35 sheets
Scan area (scanner mode)
Exposure glass: 216 x 297 mm (8.5 x 11.7 inches)
ADF: 216 x 356 mm (8.5 x 14.1 inches)
12
M018/M019
PE-MF2b/PE-MF2c