MALTEC KLP-9000KWA Instruction Manual page 30

Step 4: Close your window to secure the kit in place. It needs to hold the windows kit firmly
in place, secure the window kit with duct tape if required. It is recommended that the gap
between the adapter and the sides of the window should be sealed off for maximum
efficiency.
Step 5: Attach the hose connector to the exhaust air outlet of unit.
Step 6: Adjusting the length of the flexible exhaust hose, and avoid bends in the hose. Then
place AC near an electrical outlet.
Step 7: Adjust the louver at the air outlet, and then switch on the unit.
30