Table of Contents
Advertisement
Available languages
Available languages
Choose your location
If tipped more than 45°, allow the unit to set upright for at least 24 hours before start up.
1.
Place the unit on a firm, level surface in an area with at least 50cm of free space around it to
2.
allow for proper air circulation.
Do not operate in close proximity to walls, curtains, or other objects that may block air inlet and
3.
outlet. Keep the air inlet and outlet free of obstacles.
Never install the unit where it could be subject to：
4.
Heat sources such as radiators, heat registers, stoves or other products that products that
1.
produce heat.
Direct sunlight
7.
Mechanical vibration or shock
8.
Excessive dust
9.
Lack of ventilation, such as cabinet or bookcase
10.
Uneven surface
11.
WARNING!
Install the unit in rooms which exceed 9 m².
Do not install the unit in a place where inflammable gas may leak.
NOTE!
The manufacture may provide other suitable example or may provide additional
information about the refrigerant odour.
ATTACH THE EXHAUST HOSE
The air conditioner requires being vented outside so that the exhaust air can escape the room
which coming from the appliance contains waste heat and moisture.
Do not replace or extend exhaust hose which will result in decreased efficiency, even worse shut
down the unit due to low backpressure.
Step 1: Connect the hose connector to one end of the exhaust hose.
Step 2: Connect the windows kit adapter to the other end of the exhaust hose.
Step 3: Extend the adjustable window kit the length of your window. Connect the exhaust
hose to the window kit.
29
Advertisement
Table of Contents
