Function Menu - Vivax LED TV-32S61T2S2SM Instruction Manual

VIVAX
Satellite Installation (for DVB-S):
Press the ▼ / ▲ buttons select the desired satellite, then press the OK button to select.
Press the ◄ / ► buttons to select the setup parameters.
After selecting a satellite and setting all the scan parameters, press the blue button to enter
the Channel Search OSD.
Supported Scan Modes: Standard Search / Full Scan / Network Search.
Press the OK button to start the scan.
Cl information (for DTV):
Press the ▼ / ▲ buttons to select the Common Interface item and press OK buttonn to
enter that menu.
You can check CAM/Cl card information via this menu.
Signal info:
Contains the broadcast's signal information.
Function
OSD timer:
To select OSD timer, press
◄ / ► buttons.
Press the ◄ / ► buttons for
Always, 5 seconds, 10
seconds, 15 seconds, 30
seconds selections. These
times indicate the duration
the LiveTv menu remains on
the screen.
CEC:
HDMI CEC control offer unit communication and control from outher device through HDMI
cable.
OK
Press the button to enter the sub menu,
press the ▼ / ▲ buttons to select HDMI control /Device auto turn-off/TV auto power
on / CEC device list /Enable ARC items, then press the
EXIT
Press button to go back.
Recording list (for DTV):
Opens the list of previously recorded programs. Press the OK button to enter the sub-menu,
press the ▼ / ▲ buttons to select items, and then press the OK button to adjust.
Recording option (for DTV):
Provides access to disk and PVR settings to be used for PVR. Press the OK button
to enter the sub-menu, press the ▼ / ▲ buttons to select items, and then press the OK
button to adjust.
Hearing impaired:
Ensures the use of these in programs with information letters for people with hearing
impairment. Press ◄ / ► buttons to adjust.
OK
button to change.
34
ENG