Accessories; Basic Operation - Panasonic GA-AS10TPoE+ Installation Manual

1.3 Accessories

Please be sure to confirm the content.
Please contact our distributor if any of the contents are insufficient.
 Installation Guide (this document)
 Rack mount bracket (for 19-inch rack)
 Connection bracket (for connection two Ethernet Switches)
 Screw (for 19-inch rack)
 Screw (for fixing the mount brackets to the Ethernet Switch)
 Screw (for fixing the connection bracket)
 Rubber foot
 Power cord
* Just the PN25108-TH has 1 Installation Guide in Thai (a total of 2 guides).
**Includes PN25108-NZ only.
[Power Cord]
The following power cords are supplied as per the intended nation of delivery.
Product Number
PN25108-TH
PN25108-MY
PN25108-ID
PN25108-SG
PN25108-NZ

1.4 Basic operation

This Product does not have a power ON/OFF switch. Connect the supplied power
cord to this Ethernet Switch and connect the other end into an electric outlet.
This Ethernet Switch operates at AC 100 - 240 V (50/60 Hz).
When power is supplied, all the LEDs are turned ON.
Subsequently, the POWER (power) LED lights up green, and the STATUS (status) LED
lights up orange and the hardware runs a self-diagnostic.
When it is finished, both the the POWER (power) LED and STATUS (status) LED light
up green, and it operates as an Ethernet Switch.
As this Ethernet Switch succeeds in communicating with a terminal connected to
each port, LED of the port lights up.
When the terminal is not operating normally, for example when power is not
supplied to the terminal, LED is not lighted.
* For configuration and management method, please see the PDF
version Operating Instructions on Panasonic's website.
Locale Power Cord Rating
Thailand 250 VAC 6 A
Malaysia 250 VAC 10 A
Indonesia 250 VAC 10 A
Singapore 250 VAC 5 A
Australia
250 VAC 10 A
New Zealand
FUSE Rated Current
- TIS166-2549
13 A BS1363
- CEE7/7
5 A BS1363
- AS/NZS 3112
Quantity
1 (*)
2 (**)
2 (**)
4 (**)
8 (**)
8 (**)
4
1
Plug Type
9