Hitachi DV-C605U Service Manual page 39

Disassembly and Reaasembly
4-1-4 Main PCB, Jack PCB, S.M.P.S. Removal
1) Remove 1 Screw Œ.
2) Remove 4 Screws ´ and lift the Jack PCB ˇ up.
CAUTIONS ;
(1) When disassembling, switch the SW5 to "OFF" on the Deck PCB and remove the FPC connected to DCN1 on Main PCB.
(See Fig.1-4 on page 1-6)
(2) When assembling, insert the FPC into the DCN1 on Main PCB and switch SW5 to "ON" on the Deck PCB.
(See Fig.1-4 on page 1-6)
3) Disconnect FPC (Pin 40) from DCN1 on Main PCB ˆ, remove 2 Screws ¨ and lift the Main PCB ˆ up.
4) Remove 5 Screws Ø and lift the S.M.P.S. PCB ∏ up.
¨ 2 SCREWS
DCN1
ˆ MAIN PCB
4-4
ˇ JACK PCB
Fig. 4-4 Main PCB, Jack PCB, S.M.P.S. Removal
´ 4 SCREWS
Ø 5 SCREWS
∏ S.M.P.S. PCB
Π1 SCREW