Table of Contents
Advertisement
Thermo Scientific
Safety Tips and Maintenance
Section 5
Safety Tips
1. Confirm local power supply voltage before use the unit.
2. The unit must not be plugged into a power supply extension with other
pieces of equipment.
3. The data cable between the main body and control box cannot be
extended.
4. Never modify the supplied power cables.
5. Service should only be performed by a qualified professional
6. In the following situations, the power supply must be unplugged:
• When the unit is moved
• When the control box is opened.
• When a fuse is replaced.
• When the equipment is not functioning properly
• When the equipment is not in use.
Maintenance
Surfaces can be cleaned with mild detergent and water. Liquid should not be
allowed to enter inside the unit.
CO
Resistant Shaker
5-1
2
Advertisement
Table of Contents
