Show Room Mode - Fisher & Paykel 685 Service Manual

To enter the INSTALLATION TEST:
Turn the power on at the power point and machine on at the console.
Press and hold the KEYLOCK and OPTIONS buttons for at least 3
seconds, after which time two beeps will sound and the LED display goes
blank.
Press the START PAUSE button to start the test, which will take
approximately 3 to 10 minutes, at the end of the test if all functions are
working correctly the machine will sound end of cycle beeps and turn off, if
there has been an issue encountered the machine will display the appropriate
user warning at test end.

Show Room Mode

This feature is designed for in store demonstration purposes. So the machine
can draw attention to itself and the different functions can be demonstrated.
In this mode the machine cannot be started.
With the console Off Press & Hold Key Lock and Wash Boost for 3 Sec. Showroom Mode
To select demonstration mode:
Turn the machine on at the mains supply and off at the console.
Press and hold the KEYLOCK & WASH BOOST buttons for 3
seconds.
To return to normal operation, the mains supply must be switched off.
6