Summary of Contents for LITESHEET BriteCor AC Direct BCO
Page 1
BriteCor AC Direct BCO/BWP Wallpack Installation Manual...
Page 2
Never use a fixture in a two-wire system that is not grounded. • If dimming functionality is included, use only with Litesheet approved dimmers. • This unit is not approved for use in ducted ceilings. • Do not use excessive force when manipulating cables and wires.
Page 3
LiteSheet Solutions CONTENTS OF KIT • BCO/BWP or BCOG3/BWPG3 LED Luminaire TOOLS AND ADDITIONAL PARTS REQUIRED • Mounting screws • Silicon sealant • #2 Philips head screw driver Flat head screw driver • Preparation 1. Turn off power source. Installation 1.
Page 4
Green – Safety Ground 7. Close the luminaire lid and reinsert the machine screws. Tighten the screws fully to ensure a tight seal. For warranty information and technical support, contact us at: 434-446-1460 Find more great products at: www.litesheet.com Page 4 of 4...