Table of Contents
Advertisement
decrease.
▶
NOTE: During soaking time main display will show current
temperature and time remaining to complete soaking time.
NOTE: Heating element indication lights will light on during firing
ONLY when the heating elements are working.
During a firing these lights will switch OFF and ON indicating the
heating elements operation.
6.10 Functions during firing
Program Review
While a program is running you can check which program you
started as well as all of its segments.
While firing operate the ▶ key to select the required parameter as
shown by a flashing lamp on the mimic display.
The firing value is shown on the main display and can now be
adjusted with the
The contents of the current segment or any segment still to be
executed can be changed. Firing will still carry on as normal while
these changes are being made.
The ST535 will return to its normal running display 20 seconds
after key presses cease (or immediately after END is displayed).
PLEASE NOTE:
Changes made to programs in this way are stored and are
used for subsequent firings.
Program Advance Facility
While firing press and hold down the fn key then press the
8
obtain the
(advance) function. The ST535 will sound a short
beep and the executing program will immediately advance one step
as indicated by lamps on the mimic panel.
The effect of this is as follows:-
If ramping then the ST535 will switch to soak at the current kiln
temperature.
icon will be ON if the segment is for temperature
icon will be ON during soaking time.
▲
▼
&
keys in the usual way.
24
▲
key to
Advertisement
Table of Contents
