Table of Contents
Advertisement
Next to the main display, zone indication will light (1, indicates the
temperature of the lower zone, 2 of the middle zone and 3 of the
upper zone)
All other indications must be OFF
If any other indications are ON,
6.4 Quick Start Guide
Press button ▶ (arrow to the right)
Use buttons ▲ or ▼ until display shows the desired program
number
Press
START/STOP
Main display will show the program
start delay time (00.00) After 10
seconds
program
automatically
The version number of the software
embedded within the ST535 is now
displayed. If you need technical support
you might be asked for this code together
with the serial number.
Next displayed is the thermocouple type
setting.This should match the type of
thermocouple fitted to the kiln and can be S
for 1300C, or K for 1200C
The final display will show the kiln
temperature.
All other lamps should be off.
press
Main display will show a program
number
▶
will
start
17
▶
START/STOP
Advertisement
Table of Contents
