Table of Contents
Advertisement
Program start delay can be up to 99 hours: 59 minutes, and it is
programmed when you select to start a firing.
Note: Delayed time is AFTER how many hours you want the
program to start, not what time you want it to start.
Example: If the current time is 14.00 and you want the program to
start at 19.00 you enter 05.00 (hh.mm) as delayed time
After 10 seconds, or immediately if the
the firing will commence and the firing indicator lamp will remain
lit.
To stop the firing prematurely at any time press the
again. The firing indicator lamp will go out.
6.9 Indications during firing
When a firing is running:
Main Display will show the current temperature
Segment Display will show the segment number
that the program has reached
When heating elements are operating a star indication appears next
to current temperature, and the red lights in kilns main switch will
light ON.
Mimic display:
raise.
Next to the main display, zone
indication will light (1, indicates the
temperature of the lower zone, 2 of the
middle zone and 3 of the upper zone)
Press ▲ or ▼ to navigate through the
zone temperatures.
icon will be ON if the segment is for temperature
23
▶
key is pressed again,
▶
key
Advertisement
Table of Contents
