Table of Contents
Advertisement
3-3-1 Access Control
This function allows or denies computers with a specific MAC address
access to the network; it can also allow or deny computers with a specific
IP address, protocol, or port.
Click the 'Firewall' menu on the left of the Web management interface,
then click 'Access Control' and the following screens shows up:
1
4
5
7
10
12
Items and meanings:
Enable MAC
Filtering (1):
Client PC
MAC address (2):
2
8
9
13
14
Check this box to enable MAC address-based
filtering, and select 'Deny' or 'Allow' to decide the
behavior of the MAC filtering table. If you select
'Deny', all MAC addresses listed in the filtering
table will be denied access to the network; if you
select 'Allow', only MAC addresses listed in the
filtering table will be able to connect to the network,
and all other network devices will be rejected.
Enter the MAC address of computer
or network device here. Dashes ( - ) or colons ( : )
are not required. (i.e. if the MAC address label of
your wireless device indicates 'aa-bb-cc-dd-ee-ff' or
3
6
15
11
Advertisement
Table of Contents
