Using The Radio - Insignia NS-H3005 User Manual

Insignia NS-H3005 Home Theater System
Erasing the Complete Program List
1 Follow steps 1-2 of "Erasing a Track from
Program List" on page 28.
2 Press or
MEMORY/ENTER.
The complete program list for the disc is
erased. The lists are also cleared when the
disc is removed.
Using JPEG discs
Viewing a JPEG disc
This home theater system can play discs with
JPEG files.
Note
• Depending upon the size and number of the JPEG files, it
could take a long time for the home theater system to read
the disc's contents. If you do not see an on-screen display
after several minutes, some of the files are too big —
reduce the resolution of the JPEG files to less than 2 mega
pixels and burn another disc.
• Total number of files and folders on the disc should be less
than 650.
• Some discs may be incompatible because of different
recording format or condition of disc.
• When you are using software such as Easy CD Creator to
burn the JPEG files to the CD-R, make sure that all the
selected files have the .jpg extensions when copying into
the CD layout.
• If the files have .jpe or .jpeg extensions, rename them as
.jpg files.
• File names without .jpg extension cannot be read by this
home theater system even though the files are shown as
JPEG image files in Windows Explorer.
To view a JPEG disc:
1 Insert a disc and close the tray.
The MP3/WMA-JPEG choice menu appears
on the television screen.
2 Press or
MEMORY/ENTER.
The JPEG menu appears on the television
screen.
JPEG
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
3 Press or
MEMORY/ENTER.
A list of files in the folder appears. Press
RETURN to move to the MP3/WMA-JPEG
choice menu.
Tip
If you are in a file list and want to return to the
Folder list, use the
press MEMORY/ENTER to return to the previous
menu screen.
to select Clear All, then press
MP3/WMA
JPEG
to select JPEG, then press
Off
Slide Speed
to select a folder, then press
or to highlight
www.insignia-products.com
4 If you want to view a particular file, press
or
MEMORY/ENTER or PLAY.
File viewing starts.
Note
• During file viewing, press RETURN to move to
• Press TITLE to move to the next page.
• Press DISC MENU to move to the previous
Tip
There are three viewing Slide Speed options:
Fast, Normal, Slow, and Off. Press
highlight the Slide Speed, press
the option you want to use, then press
MEMORY/ENTER.
5 To stop viewing at any time, press STOP. The
JPEG menu appears.
Moving to another file
Press SKIP/SCAN
picture to advance to the next file or to the
previous file.
Still Picture
To view a picture:
1 Press PAUSE/STEP during slide show. The
home theater system goes into Pause mode.
2 To return to the slide show, press PLAY or
press PAUSE/STEP again.
To flip the picture:
• Press
the picture horizontally or a vertically.
To rotate picture
• Press
rotate the picture clockwise or counter
clockwise.

Using the radio

Presetting stations
You can preset 50 FM and AM stations.
To preset the radio stations:
1 Turn the volume down.
2 Press FM/AM on the remote control or front
panel until the frequency band appears on
the display and television screen.
3 Use CH/TRK/PRESET ( / ) on the remote
control or CH./PRESET (+/-) on the front
panel to select a station.
4 Press FM/AM on the remote control of front
and
panel to select the band.
5 Hold down TUNING ( / ) on the remote
control for about two seconds. The station is
searched for automatically.
to highlight a file, then press
the previous menu (JPEG menu).
page.
or once while viewing a
or while viewing a picture to flip
or during showing a picture to
or to
or to select
29