Insignia NS-H3005 User Manual page 11

Insignia NS-H3005 Home Theater System
To connect the DVD player to the television
using component video:
1 Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the home
theater system to the corresponding in jacks
on the television using Y, Pb, and Pr cables
(C).
Back of home theater system
2 Connect the left and right home theater
system AUDIO OUT jacks to the audio left
and right in jacks on the television using the
supplied audio cables.
Note
• Set the Progressive Scan to On on the DVD Setup menu for
progressive scan, see "Picture menu" on page 17.
• Progressive scan does not work with the analog video
connections (yellow VIDEO OUT and S-VIDEO OUT jack).
Progressive Scan (ColorStream
connection
Note
• DVD playback can also be done using the COMPONENT/
PROGRESSIVE SCAN VIDEO OUT connection. The tuner
and VCR only output through the RF.OUT (R) or home
theater system OUT (A, V) jack.
• If your television is a high-definition or digital-ready
television, you can take advantage of the home theater
system's progressive scan output for the highest video
resolution possible.
• If your television does not accept the Progressive Scan
format, the picture appears scrambled if you try using
progressive scan on the home theater system.
Component
Audio
Note
• Set the Progressive Scan to On on the DVD Setup menu for
• Progressive scan does not work with the analog video
®
pro)
www.insignia-products.com
To connect the DVD player to the television
using progressive scan:
1 Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the home
theater system to the corresponding in jacks
on the television using Y, Pb, and Pr cable
(C).
Back of home theater system
2 Connect the left and right home theater
system AUDIO OUT jacks to the audio left
and right in jacks on the television (A) using
the supplied audio cables.
progressive scan, see "Picture menu" on page 17.
connections (yellow VIDEO OUT and S-VIDEO OUT jack).
Component
Audio
9