Insignia I-LC23Q1 User Manual page 20

Chapter 4 Connecting Devices
3. Turn on your LCD TV (see 1-4 Turning ON the Power), then press the INPUT
button repeatedly to select AV1/S1 or AV2/S2.
UHF/VHF
(CATV)
S-Video
(S1/S2)
Composite
Video/Audio in
(AV1/AV2)
Component HDTV
Video/Audio in
(YPBPR)
Subwoofer
4-3-3 TO CONNECT USING COAXIAL (RF)
1. Connect the "output to TV" (RF out or Antenna out) jack on the back of your VCR
to the UHF/VHF jack on the back of your LCD TV with the correct optional cable.
2. Turn on your LCD TV (see 1-4 Turning ON the Power), then press the INPUT
button repeatedly to select CATV.
3. If you have an broadcast antenna or cable box, connect your broadcast antenna
or cable TV coaxial (RF) cable to the UHF/VHF connector on the back of your
VCR.
WARNING!
UHF/VHF
(CATV)
S-Video
(S1/S2)
Composite
Video/Audio in
(AV1/AV2)
Component HDTV
Video/Audio in
(YPBPR)
Subwoofer
20
If an outdoor antenna or cable system is connected to your LCD
TV, make sure that the antenna or cable system is correctly
grounded.