Assembling The Table Saw - ALDI FERREX F-TS 2000-1 User Manual

Using for the first time
transit – to prevent hazards. If you have any doubts, do not use it
but contact our customer service instead. You will find the service
address in our warranty terms on the warranty card.
Risk of injury!
The equipment and packaging material are not toys. Do not let
children play with plastic bags, plastic sheets and small parts.
There is a risk of choking and suffocating!

Assembling the table saw

Risk of injury!
If you assemble the table saw incorrectly, this could lead to serious
injuries.
Assemble the table saw correctly and completely, including all covers
and safety devices, before using for the first time.
• Never under any circumstances insert the power plug into the
socket outlet before completion of assembly.
Fitting the legs (Figs. 5-11)
1. Turn the saw table (
2. Fit the four legs (
two hexagon screws (
leg.
3. To do so, use the drill holes provided in the saw table and the
threaded sockets in the legs.
4. Then fit one middle strut (
inserting the fastening opening at the ends of the middle strut
into the detents on the legs and pressing them so that they lock
into place.
30
Layout_F_TS_2000_1_UK_SPK7.indd 30 Layout_F_TS_2000_1_UK_SPK7.indd 30
) over and set it down on the floor.
1
) loosely to the saw table with the help of
8
) and two large washers (
25
) between each of the legs by
9
) for each
28
23.06.2020 14:29:36 23.06.2020 14:29:36