Advertisement
www.malmsten.com
II - Assembly
2.1 Assembling the front frame
Assemble the crossbar using:
1.
Crossbar left (1) – 1 pcs
2.
Crossbar right (2) – 1 pcs
3.
Aluminum connector (10) – 1 pcs
4.
Connector 90x15x6 (15) – 1 pcs
5.
Hex socket button cap screw (18) – 8 pcs
6.
Enlarged washer (32) – 2 pcs
7.
Hex socket cap screw M8x12 (23) – 2 pcs
Do not tighten all the screws yet. This
must be done after all the assembly
process is complete.
2.2
2.3 Assembling the bottom (net support) frame
Assemble the rear bottom frame using:
1.
Bottom frame left (3) – 1 pcs
2.
Bottom frame right (4) – 1 pcs
3.
Aluminum connector (10) – 1 pcs
4.
Connector 90x15x6 (15) – 1 pcs
5.
Hex socket button cap screw (18) – 8 pcs
6.
Enlarged washer (32) – 2 pcs
7.
Hex socket cap screw M8x12 (23) – 2 pcs
Loctite can be used to permanently lock the bolts in its position.
Malmsten Inc • www.malmsten.com/en-US
sales@malmsten.com
Assemble the crossbar with posts using:
1.
Pre-assembled crossbar – 1 pcs
2.
Post (5) – 2 pcs
3.
Aluminum connector (10) – 2 pcs
4.
Hex socket button cap screw (18) – 16 pcs
Art. No. 1511025
Advertisement
