Your Fisher & Paykel ActiveSmart™ refrigerator is fitted with front and rear rollers to allow
you to easily move your refrigerator forward and backward. Avoid moving your refrigerator
sideways to prevent damaging the rollers or the floor covering surface.
Your refrigerator will arrive with the front feet wound up to assist with moving the product
into its final location.
1
2
Levelling of refrigerator doors
3
17mm
POSITIONING YOUR REFRIGERATOR
Roll the refrigerator into its final
position ensuring there is the
correct air gap between the product
and surrounding cabinetry. See
minimum clearance in cabinetry
dimensions table.
Adjust the front feet down until the
refrigerator is leaning backward with
the front approximately 10mm higher
than the back. This will ensure a
good door closing action.
Using the spanner provided, turn the
hinge anti-clockwise to lift the door or
clockwise to drop the door.
The larger end of the spanner is for
use on the bottom of the upper doors
(centre hinges).
After adjustment on bottom hinges,
ensure there is clearance between
lower doors and centre hinge and
doors swing freely.
14mm
21