Table of Contents
Advertisement
Troubleshooting
Fault
The LEDs
shine less
brightly.
The sensor
area is too
small.
24
Possible cause
The rechargeable
batteries could not
charge sufficiently
because the
solar panel is
not receiving
enough direct
solar radiation or
daylight.
The rechargeable
batteries could not
charge sufficiently
because the solar
panel is dirty.
Sunlight can cause
faults when setting
the sensitivity.
Solution
Select another
installation location
for the solar panel
(see chapter "Selecting
the installation
location").
Note that there is
generally less sunlight
in the winter months.
Wait for a sunny day if
necessary.
Remove any dust, dirt
or snow from the solar
panel and re-position
it if necessary.
Test the settings
again in the evening
and re-configure the
sensitivity if necessary.
15
Advertisement
Table of Contents
