Table of Contents
Advertisement
Quick Links
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within its intended use over the course of the
first 3 years after date of purchase, we will remedy the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product,
please contact us via our helpline support services, details of which are to
be found both in this manual and on the product itself.
GB
IE
PRODUCED IN CHINA FOR:
ALDI STORES LTD. PO BOX 26, ATHERSTONE
WARWICKSHIRE, CV9 2SH
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE.
Visit us at www.aldi.com
3
AFTER SALES SUPPORT
803287
01909 517672
012 475 437
GB
IE
aldi@0800repair.com
YEAR
MODEL:
WARRANTY
872-S-S, 872-S-G, 872-S-W
03/2021
6
6-872-IM-Cover_Außenstrahler-Solar_WuK2020-1-PRINT.indd 1-5
User Manual
®
SOLAR-POWERED
®
SPOTLIGHT
®
®
6
Contents
General information ................................................................. 7
Reading and storing the user manual .......................................7
Proper use .......................................................................................7
Explanation of symbols ............................................................... 8
Safety .........................................................................................9
Explanation of notes .................................................................... 9
General safety notes ...................................................................10
First use ................................................................................... 15
Checking the product and scope of delivery ......................... 15
Selecting the installation location ............................................ 17
Assembly ................................................................................. 18
Mounting the spot light ..............................................................19
Mounting the solar panel ...........................................................19
Operation ................................................................................ 20
Configuring the sensor area ..................................................... 20
Setting the lighting duration .................................................... 21
Setting the sensitivity ................................................................. 21
Adjusting the spotlight heads ...................................................22
Aligning the solar panel .............................................................22
Switching the product on and off .......................................... 22
Troubleshooting ..................................................................... 23
Cleaning ................................................................................... 26
Storage .................................................................................... 27
Technical data ......................................................................... 27
Declaration of conformity ...................................................... 28
Disposal ................................................................................... 29
Disposing of the packaging ...................................................... 29
Disposing of the product ........................................................... 29
Scope of delivery
Scope of delivery
A
1
2
3
12
11
10
9
5
4
8
7
6
14
13
15
16
5
17
18
3
15.09.20 10:36
Advertisement
Table of Contents
Related Manuals for ALDI LIGHTWAY 872-S-S
Summary of Contents for ALDI LIGHTWAY 872-S-S
-
Page 1: Table Of Contents
® Setting the lighting duration ............ 21 PRODUCED IN CHINA FOR: Setting the sensitivity ..............21 ALDI STORES LTD. PO BOX 26, ATHERSTONE Adjusting the spotlight heads ...........22 Aligning the solar panel .............22 WARWICKSHIRE, CV9 2SH Switching the product on and off .......... 22 ®... - Page 2 Scope of delivery Scope of delivery Scope of delivery Components Charging slot LUX controller Sensor housing SENS controller Motion sensor 90° TIME controller Spotlight head, 2× Power switch Wall bracket (spotlight) 60° 90° Fixing screw Plug with charging cable Spotlight Solar panel Rear panel Wall bracket (solar panel)
-
Page 3: General Information
General information General information Reading and storing the user manual This user manual accompanies this solar-powered spotlight (referred to below only as the ‘product’). It contains important information on start-up and handling. Before using the product, read the user manual carefully. This particularly applies to the safety instructions. -
Page 4: Explanation Of Symbols
General information Explanation of symbols The following symbols are used in this user manual, on the product or on the packaging. This symbol provides you with useful additional information about start-up or operation. Declaration of conformity (see chapter “Declaration of conformity”): Products marked with this symbol meet all applicable Community regulations for the European Economic Area. -
Page 5: Safety
Safety Safety Explanation of notes The following symbols and signal words are used in this user manual. WARNING! This signal symbol/word designates a hazard with moderate degree of risk which may lead to death or severe injury if not avoided. CAUTION! This signal symbol/word designates a hazard with low risk that, if not avoided, may result in minor or moderate injury. -
Page 6: General Safety Notes
Safety General safety notes WARNING! Risk of explosion and fire! Improper handling of the product can cause an explosion or a fire. − Keep children away from the product. − Keep the product away from water, other liquids, open flames and hot surfaces. −... - Page 7 Safety − Only charge the rechargeable batteries using the solar panel supplied. − Protect the rechargeable batteries against mechanical damage. − Do not throw rechargeable batteries in fire. They could explode or release toxic vapours. − Do not expose rechargeable batteries to unrestricted sunshine or heat.
- Page 8 Safety − If battery acid leaks out, avoid contact with skin, eyes and mucus membranes. In the event of contact, immediately rinse the affected areas with plenty of clean water and consult a physician. − In the event that battery acid leaks out, protective gloves must be worn and the leaked acid removed using a dry, absorbent cloth.
- Page 9 Safety CAUTION! Risk of injury! The light emitted by the LEDs is very bright and can damage the eyes if looked at directly. − Never look directly into the light of the product’s LEDs. − Ensure not to shine the light into the eyes of people or animals when inspecting or assembling/installing the product.
- Page 10 Safety been instructed in how to safely use the product and have understood the risks associated with operating it. Children may not play with the product. − Cleaning and user maintenance must not be performed by children. − Keep children away from the product. −...
-
Page 11: First Use
First use − Stop using the product if any plastic parts of the product exhibit cracks or deformation. Only replace damaged parts with corresponding original spare parts. − Do not make any modifications to the product. First use Checking the product and scope of delivery NOTICE! Risk of damage! If you do not take care when opening the... -
Page 12: Charging The Rechargeable Batteries For The First Time
First use 3. Check whether the product or the individual parts are damaged. If this is the case, do not use the product. Contact the manufacturer at the service address specified on the warranty card. Charging the rechargeable batteries for the first time WARNING! Danger of explosion! -
Page 13: Selecting The Installation Location
First use Selecting the installation location Ideal installation location for the product Motion sensors are electronic sensors that recognise movement in their environment and work as electrical switches, responding to this movement. Heat sources are sensed using the lens. If a heat source in the product’s sensor area changes or moves, the product will switch on for the preconfigured time. -
Page 14: Assembly
Assembly Ideal installation location for the solar panel The solar panel is the main source of current for the product. It absorbs sunlight, converts it into electricity and then uses this to charge the rechargeable batteries. The longer the solar panel is subjected to direct sunlight, the quicker the rechargeable batteries will charge. -
Page 15: Mounting The Spot Light
Assembly To avoid triggering the product unintentionally, the product must be installed firmly. If the product moves, this has the same effect as moving heat sources in the sensor area. Mounting the spot light 1. Choose a suitable surface for installation (see chapter section “Selecting the installation location”). -
Page 16: Operation
Operation 3. Hold the wall bracket on the installation surface and mark the three locations for fastening. 4. Drill two holes into the wall using a drill and insert the wall plugs 5. Screw the wall bracket to the fastening points with the screws as based on the properties of the installation surface (see Fig. C). -
Page 17: Setting The Lighting Duration
Operation − Select the required sensor area by turning the motion sensor housing. Setting the lighting duration 1. If necessary, turn the motion sensor housing to reach the TIME controller 2. Select the desired lighting duration between approx. 10 and 60 seconds by turning the controller in the corresponding direction: −... -
Page 18: Adjusting The Spotlight Heads
Switching the product on and off • Whether the motion sensor reacts depends on the speed at which the object is moving. The sensor will not react to movements that are too fast or too slow. • Electrical sensors are more sensitive in cold, dry weather conditions than in warm, humid climates. -
Page 19: Troubleshooting
Troubleshooting The spotlight switches on at full luminosity once the motion sensor is activated. Afterwards, the spotlight decreases in luminosity (night light function) and continues to illuminate until the motion sensor is reactivated. Troubleshooting Fault Possible cause Solution The product The rechargeable Remove any dust, dirt does not... - Page 20 Troubleshooting Fault Possible cause Solution The LEDs The rechargeable Select another shine less batteries could not installation location brightly. charge sufficiently for the solar panel because the (see chapter “Selecting solar panel is the installation not receiving location”). enough direct Note that there is solar radiation or generally less sunlight...
- Page 21 Troubleshooting Fault Possible cause Solution The product The following Find a more suitable turns off for movements or location for mounting no obvious heat sources can the spotlight or change reason. activate the sensor: the sensor area by Air conditioning turning the motion units, chimneys, sensor housing...
-
Page 22: Cleaning
Cleaning Cleaning NOTICE! Risk of damage! Improper handling of the product can damage the product. − Do not clean the product and accessories under running water, and do not spray the product with a garden hose or a high- pressure cleaner. −... -
Page 23: Storage
Storage Remove dust and dirt from the solar panel regularly, as this will otherwise reduce its ability to charge. 1. Remove dust and dirt from the spotlight with a soft, slightly moist cloth. For more stubborn dirt, use a mild rinsing agent as required. - Page 24 Technical data Product Protection class: Illuminant: 24× 0.5 W LED Output: 12 W (+/- 1 W) Supply voltage: 3.7 V Luminous flux: Approx. 900 lm Colour temperature: Approx. 6,000 K (+/- 500 K) Dimmable: Minimum distance to illuminated objects: 1 m Type of protection: IP44 Motion sensor Sensor angle:...
-
Page 25: Declaration Of Conformity
Declaration of conformity Declaration of conformity The EU declaration of conformity can be requested from the address specified on the enclosed warranty card. Disposal Disposing of the packaging Dispose of the packaging separated into single type materials. Dispose of cardboard and carton as waste paper and film via the recyclable material collection service. - Page 26 Disposal Batteries and rechargeable batteries must not be disposed of in the household waste! As the end user you are required by law to bring all batteries and rechargeable batteries, regardless of whether they contain harmful substances* or not, to a collection point run by the community/borough or to a retailer, so that they can be disposed of in an environmentally friendly manner.