Adjusting The Spotlight Heads; Aligning The Solar Panel; Switching The Product On And Off - ALDI LIGHTWAY 872-S-S User Manual

Table of Contents

Advertisement

Switching the product on and off

• Whether the motion sensor reacts depends on
the speed at which the object is moving.
The sensor will not react to movements that
are too fast or too slow.
• Electrical sensors are more sensitive in cold,
dry weather conditions than in warm, humid
climates.

Adjusting the spotlight heads

You can rotate the spotlight heads
right. You can also move each of the spotlight heads approx.
60° downwards and approx. 90° upwards (see Fig. E).
− If necessary, remove the tab
two spotlight heads individually. Then align the spotlight
heads as you like (see Fig. F).

Aligning the solar panel

− Align the solar panel
ensured (see chapter "Selecting the installation location").
Switching the product on and off
To switch the product on, set the power switch
different setting possibilities:
Position
I
O
22
15
Function
The spotlight switches on at full luminosity once
the motion sensor is activated. The spotlight
then switches off automatically afterwards.
Switch off the spotlight. The rechargeable
batteries can be recharged.
90° to the left and to
12
if you want to align the
1
so that optimum charging is
to the
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lightway 872-s-gLightway 872-s-w

Table of Contents