On the purchase of your new Ride-On. This ride-on car will provide your child with many miles of riding of enjoyment. To help assure you and your rider a safe ride we ask you to please read this manual carefully, and keep it for future reference.
Page 3
Vehicle body Gear box Wheel driver Wheel Ø12 washer Ø10 washer Lock nut Wheel cover Driving wheel house Rear axle Front axle Ø4x12 screws Side mirror Steering wheel M5x45 machine screw Ø5 nut Windshield Seat Seat back Light bar linkage Light bar support Front bumper Right front fender...
PREVENT INJURIES AND DEATHS: • NEVER LEAVE CHILD UNATTENDED. ADULT DIRECT SUPERVISION IS REQUIRED. Always keep child in view when child is in vehicle. • This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
Page 6
Turn the vehicle body upside down. 1. “Snap” the front bumper to the vehicle body. 2. Tighten five Ø4x12 screws with a screwdriver.
Page 7
HINT: The front and rear fenders on the left side have been assembled by factory. Front botttom View Rear botttom View Turn the vehicle body upright. 1. “Snap” the front fender to the vehicle body. 2. “Snap” the rear fender to the vehicle body. Turn the vhielc body upside down.
Page 8
Front botttom View 1. Rotate the front axle 180 degrees as shown. 2. Fit the fonrt axle to the vehicle body. 3. Insert the bent end of the steering column into the hole in the front axle linkage. 4. Insert eight Ø4x12 screws and tighten with a screwdriver.
Page 9
Front botttom View Remove all the parts from the front axle. 1. Slide a Ø12 washer onto the front axle. 2. Slide a front wheel onto the front alxe. 3. Slide a Ø10 washer onto the front axle. 4. Tighten a lock nut to the end of the front axle with a spanner. DO NOT over tgithen. 5.
Page 10
Remove all the parts from the rear axle. 1. Insert the rear axle through the hole in the rear wheel house. 2-3. Fit the wheel driver to the wheel, Tighten four Ø4x12 screws with screwdriver. 4. Slide a gear box on the rear axle, and ensure the motor on the gear box passes through the hole in the vehicle body.
Page 11
Turn the vehicle body upright. 1. Plug the light unit connector into the connector on the light bar support R. 2. Fit the light bar supports to the light bar. 3. Plug the connector on the light bar into the connector in the vehicle body. 4.
Page 12
1. Plug the sound unit connector on the steering wheel into the connector on the vehicle body. 2. Fit the steering wheel to the end of the steering column. 3. Line up the holes on the steering wheel with the holes on the steering column, insert the M5x45 machine screw.
Page 13
1. Insert the mirror into the hole on the side of the vehicle body. 2. Plug the red connector on the vehicle body into the red connector on the battery. 3. Plug the white connector on the motor into the white connector of the vehicle body. Repeat for the other side.
Page 14
1. Insert the tabs on seat back into the holes on the vehicle body. 2. Fit seat to the vehicle body. 3. Insert and tighten two Ø4x12 scrwes and tighten with a screwdriver.
Page 15
IMPORTANT! To move the vehicle, press the pedal down. To brake or slow down, release pressure from the pedal. Press for horn playing. Press it to power on the vehicle, long press it for 3 seconds to power off. Changes the direction that vehicle moves from forward to reverse.
Page 16
Brake button Forward button Right button Reverse button Left button Speed select button Speed indicator...
Page 18
. contact your distributor please. contact your distributor please. Contact your distributor please. Contact your distributor please. contact your distributor please. contact your distributor please. contact your distributor please. contact your distributor please. Contact your distributor please. Contact your distributor please. Contact your distributor please.
Need help?
Do you have a question about the TH17W0712 and is the answer not in the manual?
Questions and answers