InFocus SP5000 User Manual page 29

Sleep Timer: allows you to force the projector to automatically shutoff after
4 hours.
Screen Save: automatically blanks the screen with a black color after no sig-
nals are detected for a preset number of minutes. The image returns when
an active source is detected or a remote or keypad button is pressed. Screen
Startup Logo
Save is disabled when Power Save is enabled.
Startup Logo: allows you to display a blank Black, White, or Blue screen
instead of the default screen at startup and when no source is detected. It
also allows you to capture and display a custom startup screen.
To capture a custom logo, display the image you want to capture on your
computer, highlight Capture New, then press Select twice. When complete,
the projector confirms the capture.
Blank Screen
The next time you start the projector, the custom logo you captured dis-
plays.
Blank Screen: determines what color is displayed when you press the
Blank button on the remote.
PiP: (Picture in Picture) allows you to overlay a smaller window showing
the video source on top of the larger computer source window. You must
have both a computer and video source connected to use PIP. You can't
show a computer image in the smaller PiP window, only a video image. You
can select a small, medium, or large window. You can also move the PiP
window on the screen using the PiP Position X and Y options in the menu.
Picture in Picture
Press the up and down arrows to change the position.
29