InFocus SP7205 Software Manual
  1. Manuals
  2. Brands
  3. InFocus Manuals
  4. Projector
  5. SP7205
  6. Software manual
InFocus SP7205 Software Manual

InFocus SP7205 Software Manual

Infocus sp7205: install guide
Hide thumbs Also See for SP7205:
1
2
3
4
5
6

Advertisement

Table of Contents

Windows 98, 98SE and ME USB setup

Microsoft Windows 98/98SE/ME needs to install drivers for the first three projector USB devices
(Composite Video, Keyboard, & Mouse) before it detects and installs drivers for the projector itself. The
Wizard for these first three devices can appear in any order.
The USB drivers for composite video, keyboard and mouse use Microsoft default USB device drivers,
which are available on the Windows 98/98SE/ME CD. The device driver "Unknown Device" (the projector)
uses drivers supplied by InFocus.
When you plug the USB connector on the DVI Cable connector to the USB port on your computer, the
computer detects new hardware and starts the Add New Hardware Wizard.

To Connect a Composite Device, a Mouse or a Keyboard

NOTE
The procedure below shows the process you use to connect a Composite Device. You use the
same steps to connect a Mouse or a Keyboard.
1
When the Add New Hardware Wizard appears, click Next.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP7205 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for InFocus SP7205

Summary of Contents for InFocus SP7205

  • Page 1 Microsoft Windows 98/98SE/ME needs to install drivers for the first three projector USB devices (Composite Video, Keyboard, & Mouse) before it detects and installs drivers for the projector itself. The Wizard for these first three devices can appear in any order.
  • Page 2 Make sure Search For the Best Driver is selected, then click Next. Depending on where your Window Drivers are located, you can select CD-ROM or specify a location. Then click Next. Windows searches for a compatible driver. USB Driver Installation for Windows 2000...
  • Page 3 The other Add New Hardware Wizards appear after you click Finish. You follow the same steps as when you added the first driver. Once you complete adding the drivers, you will install the InFocus driver for the LP500/LP530. See the steps below for that procedure.
  • Page 4 To install the InFocus USB Projector Control Drivers for Windows 98/ME This is the final driver required for Windows 98/98SE/ME. You install the driver you downloaded from the InFocus website called IFCBULK.INF. (the file is also available on the CD-ROM that shipped with the projector) You need to install the drivers once on each laptop or desktop PC you use with the LP500/LP530.
  • Page 5 Select Specify a Location, then click Browse. Navigate to the location where you stored the driver, select it, then click OK. NOTE If you stored the file on a floppy drive, do not select Floppy Disk Drives. Instead, click Specify a Location, then navigate to the floppy drive on your computer. When Windows finds the driver, click Next.
  • Page 6 You have completed the setup on the current laptop or desktop computer. You now have keyboard "Page Up" and Page Down" capabilities and mouse control through the remote. If you were in the process of upgrading the projector software, you return to the installation program.

Table of Contents