InFocus SP5000 Software Manual
Infocus sp5000: install guide
Hide thumbs
Also See for SP5000:
- User manual (40 pages) ,
- Command line interface manual (12 pages) ,
- Quick setup (1 page)
Advertisement
Quick Links
Download this manual
See also:
User Manual
Using the projector with Windows 98 for the first
time
The first time you connect a computer running Windows 98 to the projector,
the computer recognizes the projector as "new hardware" and the Add
New Hardware Wizard appears. Follow these instructions to use the Wiz-
ard to load the correct driver (which was installed with your Windows
operating system).
If you are running Windows 2000 or Windows ME, skip these steps and go
to "Adjusting the image" on page 13.
a
Click Next to begin searching for the driver.
b
Make sure "Search for the best driver" is selected, then click Next.
c
Uncheck any checked boxes, then click Next. Windows automatically
locates the driver. If this driver has been removed, reload the driver using
your Windows operating system CD.
d
When Windows finds the driver, you are ready to install it. Click Next.
a
b
c
d
14
Advertisement
Related Manuals for InFocus SP5000
Summary of Contents for InFocus SP5000
- Page 1 Using the projector with Windows 98 for the first time The first time you connect a computer running Windows 98 to the projector, the computer recognizes the projector as “new hardware” and the Add New Hardware Wizard appears. Follow these instructions to use the Wiz- ard to load the correct driver (which was installed with your Windows operating system).
- Page 2 Skip this page if you did not connect a USB mouse cable For Windows 98: • If you connected the USB cable, the Add New Hardware Wizard appears again. Drivers must be installed to use the USB functionality. • The Wizard launches three times. The first time it detects a USB Composite Device.