PHOTOPOL A5408D User And Maintenance Manual page 7

At this step the cycle has been automatically saved with the number selected at the beginning. Pressing the
symbols on the top will lead back to the main menu and access to new programs. Press the green key to start
the cycle, the display will show the operation screenshot.
Select TIME, data will be shown in the frame above:
MINUTES are entered in the upper section
SECONDS are entered in the lower section
Once all the parameters have been entered the cycle is automatically stored
(adjustable at any time)
RIGHT ARROW to next page
START CYCLE, press the green key to start the treatment
LEFT ARROW back to menu
Screenshot of the operating cycle
Both the count-down and the residual time are steadily shown
Should you decide to abort the cycle, press the red key
Screenshot of end cycle
As the program is definitively concluded, a sequence of sound signals will be
emitted.
It is possible to launch again the same program but only provided the lid has been
opened and closed (the central key will turn again into green) or select the HOME
icon at the bottom to go back to the main menu.
A5408D Curing furnace PHOTOPOL Digital – batch 02/20
Page 7