Table of Contents
Advertisement
1. DESCRIPTION
1.1 PURPOSE OF USE
PHOTOPOL Digital has been expressly designed to carry out curing operations under the effect of ultraviolet rays.
The system has been developped to suit with the requirements of Dental, Jewellery and Rapid Prototyping
laboratories for the hardening (post-curing) process of objects manufactured with 3D DLP printers which use
liquid resins and for the final stabilisation of photosensitive composites. The UV spectrum range achieved by this
unit corresponds to the specific value of those resins (from 320 to 450nm) thus assuring to reach the complete
result.
The curing process of PHOTOPOL Digital is performed in a wide working chamber, the radiation sources have
been uniformly distributed on all walls assuring to reach the objects from any direction.
All functions are controlled and run by an electronic microprocessor circuit. The operating software features a
logical user interface providing ease of use and immediate understanding. All operating data are always clearly
displayed and can be modified directly on the full-colour touch screen.
The unit works under independent condition, it may not be supervised by the User himself therefore no defined
working place is required.
1.2 IMPROPER USE
Do not use the UV radiation performed by this unit for any different purposes of use not herewith stated; the
manufacturer will assume no liability further to improper use of the unit for any damage which could incur to
persons, animals or things.
2. TECHNICAL SPECIFICATIONS
Width
Depth at the base
Height
Net Weight
Gross Weight
Rated voltage
Delayed effect fuses
Absorption
Altitude
Operating temperature
Humidity (for storage, too)
Storage temperature
Protection level
Acoustic pressure LAeq, Tp
Pure UV LED (violet)
Near UV LED (blue)
Chamber useful size
Number of available programs
A5408D Curing furnace PHOTOPOL Digital – batch 02/20
450 mm (500 with the connections)
360 mm
215 mm
9,0 kg
11,0 kg
230VAC +/-10% – 50/60 Hz
2 ø 5x20 - 3.15 Amp
150 W – 0.75 Amp
Up to 2000m slm
from 10 to 40°C
from 20 to 80%
from -10 to +70°C
IP42
<70 dB(A)
4 circuits à 16 LED
2 circuits à 16 LED
250 x 250 x 120h
100
Page 2
Advertisement
Table of Contents
