Installation Instructions - PHOTOPOL A5408D User And Maintenance Manual

5. INSTALLATION INSTRUCTIONS

/!\ ATTENTION Installation of this machine is quite easy but it must be carried out paying utmost attention
in order to avoid any mistake which may originate problems during operation,
inconvenience or even damages.
Store the original package of the unit for any further handling or shipment under exraordinary maintenance
intervention. Remove the protective foils all around the metallic housing and inside the transparent shelves
positioned at the inside of the working chamber.
1. Place the machine on a suitable work bench, in a stable position appropriate to its weight, at least 10cm away
from the wall to allow the necessary space for the connections. During operation no vibrations are originated,
therefore no additional precautions are required at installation
2. Check the plate data, referring to the electrical feeding and the absorption then feed the unit through a
protected line by 10Amp magneto-thermic bipolar switch and circuit breaker with 30mA sensibility (devices
not part of the supply)
3. Connect the feeding cable (A) to the socket (B) placed on the right side panel and plug the other end into an
approved 230v AC - 50Hz socket with ground connection
4. Switch on the unit (C), the display (D) will light up.
A5408D Curing furnace PHOTOPOL Digital – batch 02/20
A = Electric cable
B = Feeding plug
C = Main switch
D = Touch display
E = Tilting lid
F = Radiation chamber
Page 4