1. DESCRIPTION 1.1 PURPOSE OF USE PHOTOPOL Digital has been expressly designed to carry out curing operations under the effect of ultraviolet rays. The system has been developped to suit with the requirements of Dental, Jewellery and Rapid Prototyping laboratories for the hardening (post-curing) process of objects manufactured with 3D DLP printers which use liquid resins and for the final stabilisation of photosensitive composites.
2006/42 EEC Community Directive on machinery and following amendments and integrations. PHOTOPOL Digital complies with the Directives EMC 2014/30/EU and LVD 2014/35/EU. Careful inspection and full routine testing is carried out singularly on each machine which is furtherly tested by an automatic test installation (Chauvin Arnoux C.A 6155) carrying out in sequence several tests and it prints a report...
A5408D Curing furnace PHOTOPOL Digital – batch 02/20 5. INSTALLATION INSTRUCTIONS /!\ ATTENTION Installation of this machine is quite easy but it must be carried out paying utmost attention in order to avoid any mistake which may originate problems during operation, inconvenience or even damages.
On startup the PHOTOPOL mark will appear, touch the screen to enter the main menu where the three icons are visible...
Page 6
A5408D Curing furnace PHOTOPOL Digital – batch 02/20 7. SETTING THE WORKING CYCLE From the main menu select the central icon PROGRAM STORAGE Find a free number to be attributed to the program (at the beginning they are all free, once the cycle contains some stored data the V combined to the...
Page 7
A5408D Curing furnace PHOTOPOL Digital – batch 02/20 Select TIME, data will be shown in the frame above: MINUTES are entered in the upper section SECONDS are entered in the lower section Once all the parameters have been entered the cycle is automatically stored...
A5408D Curing furnace PHOTOPOL Digital – batch 02/20 8. INSTRUCTIONS FOR USE Switch on the main switch, the display will light up and the unit is ready to input the operating data, touch the display to access the main menu...
A5408D Curing furnace PHOTOPOL Digital – batch 02/20 Cleaning and replacement of the internal shelves In case the internal shelves shall be removed or replaced pay attention not to hit the connector of the LED circuit on the wall. Seize the shelf with your both hands and slightly bend it to allow to overcome the obstacle. Use exclusively genuine spare-parts which permit the correct UV Rays to pass through.
Page 10
A5408D Curing furnace PHOTOPOL Digital – batch 02/20 12. EXPLODED VIEW AND SPARE-PARTS LIST PHOTOPOL DIGITAL (A5408D) POS. CODE DESCRIZIONE DESCRIPTION NVT193 MANIGLIA SPORTELLO LID HANDLE 5408054B SPORTELLO SUPERIORE UPPER LID 5408056 SUPPORTO CIRCUITO LED LED CIRCUIT SUPPORT 5408200 CIRCUITO 16 LED UV (VIOLETTO)