PHOTOPOL A5408D User And Maintenance Manual page 6

7. SETTING THE WORKING CYCLE
When setting a working cycle some important parameters have to be selected:
1. Environmental condition (namely the quality of site where the curing will be carried out – highly
important for resins in class IIa)
2. Applied voltage (speed and intensity rate the LEDs will be working at)
3. Working time (length of the irradiation step)
From the main menu select the central icon PROGRAM STORAGE
Find a free number to be attributed to the program (at the beginning they
are all free, once the cycle contains some stored data the V combined to the
number will turn from
immediate execution with no need to browse all parameters
RIGHT ARROW to next page
The preparation of a polymerization cycle starts with the choice of the
WORKING CONDITIONS, the selected symbol will turn darker.
Identifying a cycle under atmosphere (no special condition)
Identifying a cycle under protected atmosphere (the flask is filled up with
inert gas - nitrogen)
RIGHT ARROW to next page
Select POWER, the selected symbol will turn darker
Slow and progressive starting – highest power preventing the outer surface
from hardening before the light can actually reach all parts at the inside.
Slow and progressive starting – reduced power ideal for objects of much
reduced thickness
Immediate start – highest power ideal for dark objects
RIGHT ARROW to next page
A5408D Curing furnace PHOTOPOL Digital – batch 02/20
green to red), START will appear allowing the
Page 6