Setting Up The Projector - InFocus LP750 User Manual

SETTING UP THE PROJECTOR

1 Place the projector on a flat surface.
The projector must be within 10 feet (3 m) of your power
•
source and within 8 feet (2.4 m) of your computer.
If you want to project from behind a translucent screen, set
•
up the projector behind your screen. See "Rear Projection"
on page 32 to reverse the image.
If you are installing the projector on the ceiling, refer to the
•
LP750 Ceiling Mount Installation Guide that comes with the
Ceiling Mount Kit for more information. To turn the image
upside down, see "Ceiling Projection" on page 31. The Ceil-
ing Mount Kit is sold separately; see page 50.
2 Position the projector the desired distance from the screen.
The distance from the lens of the projector to the screen
•
determines the size of the projected image. Figure 3 shows
three projected image sizes using the lens at maximum
zoom. For more information about image size, see "Pro-
jected Image Size" on page 56.
3 Make sure the projector and your computer are turned off.
10 ft.
4 ft.
Projected image size (maximum zoom)
NOTE: An optional extension
cable, sold separately, lets you
increase the distance between the
projector and your computer to
68 feet (21 m). See "Optional
Accessories" on page 50.
30 ft.
F 3
IGURE
5