InFocus LP750 User Manual page 22

U s i n g t
NOTE: To control the computer's
mouse from the projector's remote
or keypad, you must connect the
mouse cable to the CableWizard.
See page 7 for details.
18
h e P r o
F 14
IGURE
Remote control
Press anywhere on the edge of the disk mouse to move the cursor
on the screen. You can move the cursor at any angle by pressing
the corresponding edge of the disk. The mouse button on the top
of the remote simulates your computer's right mouse button; the
button on the bottom simulates your computer's left mouse but-
ton. When you press the disk mouse, the remote lights up. The
light goes off 10 seconds after you stop pressing buttons.
To use the laser, press and hold the laser button. The laser goes off
when the button is released.
If you are creating presentations in Microsoft
can use the remote's mouse buttons to navigate through your
presentation while in Slide Show mode. To configure PowerPoint
for this, choose Options from the Tools menu, click the View Tab,
de-select the "Popup Menu on Right Mouse Click" option in the
Slide Show section, then click OK. Then, when you're in Power-
Point's Slide Show mode, a left click advances to the next slide
and a right click returns to the previous slide (other PowerPoint
modes are not affected).
j e c t o r
laser pointer
disk mouse
right mouse button
left mouse button
(on underside of remote)
® ®
PowerPoint , you