InFocus LP750 User Manual page 36

U s i n g t
32
h e P r o
Rear Projection
When you turn
image so you can project from behind a translucent screen. High-
light Rear Projection, then click either mouse button to select turn
this feature on and off.
Default Source
Default Source toggles between Computer 1, Computer 2, and
Video. This determines which source the projector checks first for
active video during power-up. Highlight Default Source and
click either mouse button to toggle between the options.
Auto Source Select
This setting toggles between On and Off. When this feature is Off,
the projector defaults to the source selected in Default Source. To
display another source, you must manually select one by press-
ing the
comp
feature is On, the projector automatically finds the active source,
checking the default source first. Highlight Auto Source Select
and click either mouse button to turn this feature on and off.
Plug and Play
This setting toggles between On and Off. When it is On, most
new computers will automatically recognize the LP750, then set
the monitor resolution and refresh rate accordingly. You need to
set the Plug and Play setting to Off for the LP750 to display prop-
erly on some older computers. The Plug and Play setting does not
affect video images. If the LP750 display constantly changes
between the computer image and the message, "Perfecting the
image", you may need to set Plug and Play to Off.
Display Messages
This setting toggles between On and Off. When this feature is On,
status messages such as "No signal detected" or "Standby"
appear in the lower-right corner of the screen. Click either mouse
button to turn this feature off and not see status messages.
Display Startup Screen
This setting toggles between On and Off. When this feature is On,
the In Focus startup screen appears when the projector starts up
and remains until an active source is detected. The startup screen
contains information on contacting In Focus. Click either mouse
button to turn this feature off and display a plain black or blue
screen instead of the startup screen.
j e c t o r
Rear Projection
or button on the keypad or remote. When this
video
on, the projector reverses the